Installing KOOLTILE

The process combines the following steps

application of a bitumenous waterproofing layer over the smooth RCC slab & fixing the insulation tiles above it

KOOLTILE on your roof gives an insulation that is uniform, airtight, free from thermal bridges (see below).

next step is to provide an adequate gradient with screed, for effective water drainage.

all terrace finishing options, e.g. mosaic, stone or brick tiles, can be easily installed above the screed.

Now your roof will be protected from cracks & resultant seepage and leakage for many years.

How does KOOLTILE make your roof free from thermal leaks or heat bridges?

It is possible to ensure 100% insulation due to the special Design features of KOOLTILEs :

* Molded EPS tiles (800mm x 600mm) with tongue and groove edges for airtight, monolithic insulation & easy application.

* Light weight but with adequate compressive strength for ease of transportation and handling & also strong enough to withstand the load of even the heaviest of diesel generator sets on the terace.

* In-built shuttering design ensures saving of time & labour for installation of final finishing material on terrace.

Bitumen based waterproofing coat over RCC roof.

Waterproofing coat extended to partially overlap parapet.

Fixing molded Insulation tiles with tongue & groove edges for uniform and seamless insulation.

Screed slope with 1 inch gradient per 10 ft over insulated roof.

Brick tiles grouted over screed slope.

Plaster over Brick tiles.

Finished terrace, over which mosaic tiles can also be fixed.

---